EP BELT: under condition of middle/long distance,heavy loading capacity,high speedconveying, good flexing capacity, troughable,heat resistant,low lad elongation. | |
NN BELT: under condition of middle/ long distance.heavy loading capacity, high speed,strong lash and high vulnerability. | |
CC BELT: suitable for middle/ short distance conveying. |
Belt Type |
Fabric Type |
Single Fabric Strength (N/mm) |
Single Fabric Thickness (mm) |
Cover Thickness(mm) |
Ply |
Width Range (mm) |
Length(m)/Roll | |
Top Rubber |
Bottom Rubber | |||||||
CC Belt |
CC--56 |
56 |
1.10 |
3-16 |
0-10 |
3-12 |
300-7400 |
20-1000 |
NN Belt |
NN100 |
100 |
0.70 |
3-16 |
0-10 |
2-10 |
300-7400 |
20-1000 |
NN150 |
150 |
0.75 | ||||||
NN200 |
200 |
0.90 | ||||||
NN250 |
250 |
1.15 | ||||||
NN300 |
300 |
1.25 | ||||||
NN400 |
400 |
1.50 | ||||||
EP Belt |
EP100 |
100 |
0.75 |
3-16 |
0-10 |
2-8 |
300-7400 |
20-1000 |
EP150 |
150 |
0.85 | ||||||
EP200 |
200 |
1.00 | ||||||
EP250 |
250 |
1.20 | ||||||
EP300 |
300 |
1.35 | ||||||
EP350 |
350 |
1.50 | ||||||
EP400 |
400 |
1.65 |
Type | According to Standards |
Ultra-high abrasion resistant | Shore abrasion≤70mm3 |
High abrasion resistant | AS1332 A,DIN22102 W |
Impact and abrasion resistant | DIN22102 X Y, AS1332 M N, JIS K6322 A S,GB/T7984 H D |
Heat resistant | ISO 4195,HG/T2297,GB/T20021 |
Flame resistant & Anti static general use | DIN 22102 K |
Flame resistant & Anti static for coal mine use | DIN22109 V |
Oil resistant | HG/T3714 |
Acid/alkali resistant | HG/T3782 |
Cold resistant | HG/T3647 |
Ozone resistant | RMA (ASTM D1171) |